Gates

Product Price :Get Latest Price

Product BrochureProduct Details:

Gates PowerGrip Twin Power Belts have teeth on both sides to provide synchronization from both driving surfaces. This configuration unique drive such as drives, shaft rotation reversal, ad serpentine drives. Twin Power Belts similar in construction to regular synchronous belts, including nylon-faced teeth on both sides.

Product Price :Get Latest Price

Product Details:

Powergrip GT2 belts have twice the power rating of PowerGrip HTD belts, they allow more compact drive package to transfer higher power capacity , small drive package increase design flexibility , space utilisation and cost effective ness due to longer service life .

Powergrip GT2 belts also operate on Existing PowerGrip HTD drives.

Gates 5mm,8mm and 14mm pitch GT2 and 20mm pitch HTD belts have helicaly-wound fiberglass tension members embedded in a  Neoprene body with the belt teeth faced with a tough wear-resistant nylon fabric. The three principal dimensions of a belt are Pitch, Pitch Length , width.

The part number designations for PowerGrip belts are depend on the belt. Belt designations are shown for each of the available pitches.

Key features : Helically wound tensile member provides high strength , excellent flex life and high resistance to elongation Tough nylon facing with low coefficient of friction protect the tooth wear Wide speed range & Efficiency up toGT2 belts have twice the power rating against HTD belts 99% Due to longer service life reduce maintenance time High tooth jump resistance Gates PowerGripGT2 belts are made in pitches : 3M, 5M, 8M,14MReference Dimensions

Product Price :Get Latest Price

Product BrochureGATES POWERGRIP® GT3 belts

Gates’ latest development in synchronous rubber belts is PowerGrip® GT3. The PowerGrip® GT3 product range is a major leap in synchronous rubber belt technology. this new synchronous belt transmits up to 30% more power than previous generation belts. PowerGrip® GT3 is available in 2MGT, 3MGT, 5MGT, 8MGT and 14MGT pitches.

They allow the design of more compact drives with higher power capacity, which increases space utilisation and cost effectiveness. They are a perfect replacement for HTD® and GT type drives.

By the use of a technology advanced compound , Power Grip synchronous belts transmit up to 30% more power than previous generation belts. They allow the design of more compact drives with higher power capacity , which increases space utilization and cost effectiveness. They are a perfect replacement for HTD an GT type drives.

Key features : PowerGrip® GT3 8MGT and 14MGT pitches are standard static conductive to ISO 9563 and can be used in hazardous explosive areas. Certificates delivered on request. PowerGrip® GT3 is supplied in a silicone-free construction. For paint processes, Gates can supply, on demand, the PowerGrip® GT3 8MGT and 14MGT in a paint and varnish compatible construction. As contamination risks are excluded, it is the ideal belt for paint processes in the automotive industry. Substantially increased power ratings: up to 30% more than previous constructions. High capacity belt with reduced noise levels. No lubrication needed.

Product Price :Get Latest Price

Product BrochureProduct Details:

The patented use of Carbon Fiber as the tensile cord in this belt provides increased horsepower rating for greater power density and compactness and increased flexibility.

Markets/Applications

All industrial markets, especially suited to replace roller chain drives. Narrow width minimizes reducer overhung loads and left-justified hubs on Poly Chain GT2 sprockets accommodate short shaft lengths.

Features/Advantages Maintenance-free, clean solution for roller chain drive conversion Significantly reduces maintenance costs Equivalent capacity to roller chain drives in the same width Easy rust-free wash-down with Steel hardware Fast drive conversion payback Quieter than roller chain drives nNew construction provides up to 55% more low-speed capacity than the original PCGT construction and 30% more than PCGT2. Gates curv ilinear tooth profile provides high shear strength, noise reduction, and improved load carrying capacity. Durable poly urethane construction resists chemicals, oil, pollutants, and abrasion. Nylon tooth facing reduces friction and eliminates the need for lubrication

Product Price :Get Latest Price

Product BrochureProduct Details:

Sonic Belt Tension TesterThe 500 latest results are retained for record keeping. Exporting the results to PC is Possible.(Note:Operate only japanese Microsoft Windows Vista/7/8 ) Judgment function of the result Utilized the equipped application U-508 for PC ,before hand, you can set up both upper and lower limit;therefore you can easily find out the result.

Product Price :Get Latest Price

Manual Belt Tension Tester

The spring scale type tester measures how much force is required to deflect the belt a specified distance at the center of its span. This is the force deflection method of tensioning belts. The Sonic Tension Meter measures the vibration of the belt span and instantly converts the vibration frequency into belt static tension. This is the span vibration method of tensioning belts.

Force Deflection Tension Method

The force deflection tension method does not directly measure belt span tension or static tension. The deflection force is a calculated value that is based on the amount of static tension required in the belt. Static tension is the tension force that is actually in the belt, while deflection force is simply a measurement to check how much static tension is in the belt. The tension testers used for the force deflection tension method are available in one, two, or five barrel configurations. The one barrel tension tester can measure up to 30 lb. of force; the two barrel tension tester can measure up to 66 lb. of force; and the five barrel tension tester can measure up to 165 lb. of force. Add the force readings off each barrel to determine the total force being measured.

Product Price :Get Latest Price

Product Details:

Gates’ latest development in synchronous rubber belts is PowerGrip® GT3. The PowerGrip® GT3 product range is a major leap in synchronous rubber belt technology.  this new synchronous belt transmits up to 30% more power than previous generation belts. PowerGrip® GT3 is available in 2MGT, 3MGT, 5MGT, 8MGT and 14MGT pitches.

They allow the design of more compact drives with higher power capacity, which increases space utilisation and cost effectiveness. They are a perfect replacement for HTD® and GT type drives.

By the use of a technology advanced compound , Power Grip synchronous belts transmit up to 30% more power than previous generation belts. They allow the design of more compact drives with higher power capacity , which increases space utilization and cost effectiveness. They are a perfect replacement for HTD an GT type drives.

Key features : PowerGrip® GT3 8MGT and 14MGT pitches are standard static conductive to ISO 9563 and can be used in hazardous explosive areas. Certificates delivered on request. PowerGrip® GT3 is supplied in a silicone-free construction. For paint processes, Gates can supply, on demand, the PowerGrip® GT3 8MGT and 14MGT in a paint and varnish compatible construction. As contamination risks are excluded, it is the ideal belt for paint processes in the automotive industry. Substantially increased power ratings: up to 30% more than previous constructions. High capacity belt with reduced noise levels. No lubrication needed.

Product Price :Get Latest Price

Product Details:

The patented use of Carbon Fiber as the tensile cord in this belt provides increased horsepower rating for greater power density and compactness and increased flexibility.

Markets/Applications

All industrial markets, especially suited to replace roller chain drives. Narrow width minimizes reducer overhung loads and left-justified hubs on Poly Chain GT2 sprockets accommodate short shaft lengths.

Features/Advantages Maintenance-free, clean solution for roller chain drive conversion Significantly reduces maintenance costs Equivalent capacity to roller chain drives in the same width Easy rust-free wash-down with Steel hardware Fast drive conversion payback Quieter than roller chain drives nNew construction provides up to 55% more low-speed capacity than the original PCGT construction and 30% more than PCGT2. Gates curv ilinear tooth profile provides high shear strength, noise reduction, and improved load carrying capacity. Durable poly urethane construction resists chemicals, oil, pollutants, and abrasion. Nylon tooth facing reduces friction and eliminates the need for lubrication.

Product Price :Get Latest Price

Product Details:

Polyflex® JB™ is synonymous with high power density in small spaces.  Developed by Gates and produced to patented manufacturing processes, Gates Polyflex® JB™ belts provide more load-carrying capacity at higher speeds to small precision multiple V-belt drives.  This results in significant cost savings and improved design freedom.  Polyflex® JB™ belts are recommended for use on bench type milling machines, lathe drives, woodworking and metalworking machine spindle drives, computer peripheral equipment, small blowers, etc.  They are available in 3M-JB, 5M-JB, 7M-JB and 11M-JB sections.

Identification Durable yellow marking indicating type and dimensionConstruction Truncated ribs ensure flexibility, reduce heat build-up and improve rib crack resistance .they also enhance load-carrying capacity on small diameter pulleys. High modulus ,low stretch polyester tensile member provides superior resistance to fatigue and shock loads All elastomeric rubber compound provides and oil heat resistance. Specially formulated fibre reinforced undercord stock improves belt stability.Advantages Extremely smooth and cool running. Very high power capacity per rib Long life due to extra load carrying capacity Improved performance on back idllers Smaller drive package Tolerant of pulley groove debris Static conductive (ISO 1813) and can as such be used in the conditions describes in the Directive 94/9/EC -ATEX

Micro V belts are available in PJ,PK and PM cross sections .The figure below shows a cross sectional view illustrating the nominal belt dimensions rib width and belt height.All these belts will operate in standard pulleys provide the pulleys are manufactured to the DIN 7867 or ISO 9982 standard for the specific cross section

Product Price :Get Latest Price

Product Details:

The 500 latest results are retained for record keeping. Exporting the results to PC is Possible.(Note:Operate only japanese Microsoft Windows Vista/7/8 ) Judgment function of the result Utilized the equipped application U-508 for PC ,before hand, you can set up both upper and lower limit;therefore you can easily find out the result.

Product Price :Get Latest Price

The spring scale type tester measures how much force is required to deflect the belt a specified distance at the center of its span. This is the force deflection method of tensioning belts. The Sonic Tension Meter measures the vibration of the belt span and instantly converts the vibration frequency into belt static tension. This is the span vibration method of tensioning belts.

Force Deflection Tension Method

The force deflection tension method does not directly measure belt span tension or static tension. The deflection force is a calculated value that is based on the amount of static tension required in the belt. Static tension is the tension force that is actually in the belt, while deflection force is simply a measurement to check how much static tension is in the belt. The tension testers used for the force deflection tension method are available in one, two, or five barrel configurations. The one barrel tension tester can measure up to 30 lb. of force; the two barrel tension tester can measure up to 66 lb. of force; and the five barrel tension tester can measure up to 165 lb. of force. Add the force readings off each barrel to determine the total force being measured.

Product Price :Get Latest Price

Product BrochureProduct Details:

Powergrip GT2 belts have twice the power rating of PowerGrip HTD belts, they allow more compact drive package to transfer higher power capacity , small drive package increase design flexibility , space utilisation and cost effective ness due to longer service life .

Powergrip GT2 belts also operate on Existing PowerGrip HTD drives.

Gates 5mm,8mm and 14mm pitch GT2 and 20mm pitch HTD belts have helicaly-wound fiberglass tension members embedded in a Neoprene body with the belt teeth faced with a tough wear-resistant nylon fabric. The three principal dimensions of a belt are Pitch, Pitch Length , width.

The part number designations for PowerGrip belts are depend on the belt. Belt designations are shown for each of the available pitches.

Key features : Helically wound tensile member provides high strength , excellent flex life and high resistance to elongation Tough nylon facing with low coefficient of friction protect the tooth wear Wide speed range Efficiency up toGT2 belts have twice the power rating against HTD belts 99% Due to longer service life reduce maintenance time High tooth jump resistance Gates PowerGripGT2 belts are made in pitches : 3M, 5M, 8M,14M

Approx. Rs 199 / PieceGet Latest Price

Product Details:

Gates Micro-V® multi-ribbed belts ensure outstanding performance on any industrial multi-ribbed drive.  They cover a multitude of industrial applications and are suitable for industrial drives in washing machines, textile machines, vacuum cleaners, lawn mowers, machine tools, medical equipment and many more.  The full line of Micro-V® belt products includes slabs in several widths as well as single belts in PJ, PK,  PL and PM sections in order to perfectly match customer requirements. Both slabs and belts can be manufactured in a great variety of number of ribs.

Identification Durable yellow marking indicating type and dimensionConstruction Truncated ribs ensure flexibility, reduce heat build-up and improve rib crack resistance .they also enhance load-carrying capacity on small diameter pulleys. High modulus ,low stretch polyester tensile member provides superior resistance to fatigue and shock loads All elastomeric rubber compound provides and oil heat resistance. Specially formulated fibre reinforced undercord stock improves belt stability.Advantages Extremely smooth and cool running. Very high power capacity per rib Long life due to extra load carrying capacity Improved performance on back idllers Smaller drive package Tolerant of pulley groove debris Static conductive (ISO 1813) and can as such be used in the conditions describes in the Directive 94/9/EC -ATEX

Micro V belts are available in PJ,PK and PM cross sections .The figure below shows a cross sectional view illustrating the nominal belt dimensions rib width and belt height.All these belts will operate in standard pulleys provide the pulleys are manufactured to the DIN 7867 or ISO 9982 standard for the specific cross section

Product Price :Get Latest Price

Product Details:

Gates Predator® V-belts are the markets’ leading V-belts.  Unique in their extreme robustness and high load carrying capability they are unrivalled.  They are excellent problem solvers that perform well in harsh environments and in extremely demanding applications where standard V-belts have performance issues.  The Predator® belt difference is in the construction: they have the highest power density of any V-belt and virtually zero stretch because of the use of high strength, high modulus aramid tensile cords.  They are available as PowerBand® belts in SPBP, SPCP, 9JP, 15JP and 8VP sections and as single belts in AP, BP, CP, SPBP, SPCP and 8VP sections.

Product Price :Get Latest Price

Gates Quad-Power® II PowerBand® offers a stable position in the pulleys and a smooth running solution for drives where single belts vibrate. It consists of several V-belts joined together by a permanent, high strength tie band, thus being tougher than all the belts taken separately. Quad-Power® II PowerBand® is easy to install and offers a high resistance to vibrations.

Product Price :Get Latest Price

Product Details:

Because of today’s increasing maintenance and energy costs, industry is becoming more aware of ways to improve efficiency and reduce operating expenses.  Eliminating losses in power transmission systems can translate into large savings.  Gates leads the way in the development of cost and energy efficient belt drive systems and now brings you its new generation of Quad-Power® III notched raw edge narrow section V-belts.  Gates Quad-Power® III belts deliver higher power ratings, increased trouble-free service life and reduced  energy consumption.

Product Price :Get Latest Price

Product BrochureEuro Grip flexible couplings are designed to connect two shafts subject to misalignment and axial movement and relieve the stress that wound result from a rigid coupling. They consist of a rubber sleeve and two metal end pieces. They consist of rubber sleeve and two metal en pieces. Their design is unique, with their OGEE lines allowing he coupling to act as a torque/life indicator for the drive. Gates Euro grip flexible coupling are available in sizes in sizes 19,28,42,48 and 60 and are bored to suit a taper bush or a plan bore and keyway.